See below the sequence of pictures that illustrate this process Click the icon to open the Network Settings. Click on Change adapter options. Right-click on "Ethernet "and click "Properties". Double click the "Internet Protocol Version 4". And it's done. Now you can do the same with your IP camera I'm assuming you are using the manual configuration.
OK, now it's time to add the IP address to the camera. Open a web browser and type the camera default IP address. Enter the username and password to login to the camera. Here's an example of the setup of this network. HTTP Port:. Server Port:. IP Address:. Subnet Mask:. Preferred DNS:. Alternate DNS:. Extra information. Please share this information with your friends This Article Applies to:.
Step 2 Open a web browser and type the IP address. Enter your login information. Step 4 After you change the port, you will need to reboot the camera in order to save the changes. Step 2 Type the IP address and the port used by the camera in the corresponding field.
Step 3 Port can now be used by the camera. Is this faq useful? Your feedback helps improve this site. Yes Somewhat No. Any other feedback? Submit No, Thanks. Thank you We appreciate your feedback. Click here to contact TP-Link technical support. An IP address scheme may look like a complex set of numbers, but the concept is quite simple. Think of each octet as a specific unit of a house address - first octet is the country, second is the city, third is the street, and fourth is the house number.
This means that the IP address of each device will have the same first three octets as the first three octets of the router, but with a different fourth octet. For example, for a router with an IP address of These three devices, router, NVR, and IP camera, would all be considered on the same network, affording them the ability to communicate with each other.
It is the address you would use to access your network when outside the house when using the internet on your smartphone. The reason for having unique WAN IP address schemes is because each internet connection has a unique number on the internet that can be "dialed" from another internet connection. If two devices on your home or local network have the same IP address, for example, if the NVR and security camera have an IP address of You will need to change the IP address of one device in order to resolve the IP conflict.
To resolve an IP address conflict with two devices, you need to disconnect both conflicting devices from the network, reconnect one device, and change its IP address. You will then be able connect the second device and proceed conflict-free. To properly setup your security camera system for remote viewing, first we need to see if there are multiple routers on your network.
Bring up the Command Prompt window and type the command tracert 8. To understand the results of a tracert command, you would look at the first 3 lines of the results. In the example above, line one shows an IP address of We can conclude that is a router as only local routers have recognizable IP address schemes of Further, our results happen to have a name for the device, which makes it easier as the name has the word router and gateway in it.
So we know this is a local router for our business network. Line 2 of the results has an IP address of This line 2 stands for the "second hop" from our computer. Up to this point data has traveled from our computer to our router If your results have a recognizable local IP address for line 1, and some obscure IP address for line 2, that means you have one router, and the IP address of your home router is that from line 1.
The address from Line 1 also tells us that the LAN network scheme is Below is an example of a network with two routers on the local network. After executing tracert 8. Line 1 - one router with an IP address of Having two separate routers on your local network will create issues when trying to setup your security video recorder or IP cameras for remote viewing. Unless you are an IT professional who understands advanced networking and port forwarding on such a network, your video recorder or IP cameras should be connected to the First Router with port forwarding rules enabled on the first router.
In addition to use tracert to determine the number of routers on your local network, ipconfig is another command that is useful in determining the IP address of the router your computer is connected to, and the IP address of your computer. Using the Command Prompt window, type ipconfig. Under Ethernet adapter Primary look for the IPv4 Address which is the address of your computer on the local network.
In the example above it is If you are using a laptop with WiFi to run this command, you would look under Wireless LAN adapter , and in the example below, the IP of the computer is Note that the router for both the wired and wireless networks is That is because the same router manages both the wired and wireless network.
0コメント